dmesg - 2013-02-25 16:00
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-38-generic (buildd@akateko) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #61-Ubuntu SMP Tue Feb 19 12:18:21 UTC 2013 (Ubuntu 3.2.0-38.61-generic 3.2.37)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffd0000 (usable)
[ 0.000000] BIOS-e820: 00000000bffd0000 - 00000000bffde000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bffde000 - 00000000c0000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: MSI MS-7250/MS-7250, BIOS V3.8 09/06/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 0100000000 mask FFC0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000140000000 aka 5120M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbffd0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bffd0000
[ 0.000000] 0000000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bffd0000 page 4k
[ 0.000000] kernel direct mapping tables up to bffd0000 @ 1fffb000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ bffce000-bffd0000
[ 0.000000] RAMDISK: 364d8000 - 37264000
[ 0.000000] ACPI: RSDP 00000000000f9270 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000bffd0000 00038 (v01 MSIISM OEMRSDT 09000706 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bffd0200 00084 (v02 MSIISM OEMFACP 09000706 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bffd0440 05045 (v01 1ADGH 1ADGH013 00000013 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bffde000 00040
[ 0.000000] ACPI: APIC 00000000bffd0390 00070 (v01 MSIISM OEMAPIC 09000706 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bffd0400 0003C (v01 MSIISM OEMMCFG 09000706 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bffde040 00061 (v01 MSIISM AMI_OEM 09000706 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bffd5490 00038 (v01 MSIISM OEMHPET0 09000706 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bffd0
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1048415
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 765968 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 258048 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bffd0000 - 00000000bffde000
[ 0.000000] PM: Registered nosave memory: 00000000bffde000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff780000
[ 0.000000] PM: Registered nosave memory: 00000000ff780000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s83136 r8192 d23360 u1048576
[ 0.000000] pcpu-alloc: s83136 r8192 d23360 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027930
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 36f6000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
[ 0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
[ 0.000000] Memory: 3966608k/5242880k available (6570k kernel code, 1049220k absent, 227052k reserved, 6635k data, 920k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:512 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2891.069 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5782.13 BogoMIPS (lpj=11564276)
[ 0.004009] pid_max: default: 32768 minimum: 301
[ 0.004031] Security Framework initialized
[ 0.004045] AppArmor: AppArmor initialized
[ 0.004046] Yama: becoming mindful.
[ 0.004354] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008495] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009343] Mount-cache hash table entries: 256
[ 0.009471] Initializing cgroup subsys cpuacct
[ 0.009476] Initializing cgroup subsys memory
[ 0.009484] Initializing cgroup subsys devices
[ 0.009486] Initializing cgroup subsys freezer
[ 0.009488] Initializing cgroup subsys blkio
[ 0.009494] Initializing cgroup subsys perf_event
[ 0.009521] tseg: 0000000000
[ 0.009533] CPU: Physical Processor ID: 0
[ 0.009534] CPU: Processor Core ID: 0
[ 0.009536] mce: CPU supports 5 MCE banks
[ 0.009546] using AMD E400 aware idle routine
[ 0.010844] ACPI: Core revision 20110623
[ 0.013341] ftrace: allocating 26545 entries in 105 pages
[ 0.016710] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056554] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
[ 0.060003] Performance Events: AMD PMU driver.
[ 0.060003] ... version: 0
[ 0.060003] ... bit width: 48
[ 0.060003] ... generic registers: 4
[ 0.060003] ... value mask: 0000ffffffffffff
[ 0.060003] ... max period: 00007fffffffffff
[ 0.060003] ... fixed-purpose events: 0
[ 0.060003] ... event mask: 000000000000000f
[ 0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.060003] Booting Node 0, Processors #1 Ok.
[ 0.060003] smpboot cpu 1: start_ip = 9a000
[ 0.144070] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.144093] Brought up 2 CPUs
[ 0.144095] Total of 2 processors activated (11564.00 BogoMIPS).
[ 0.144603] devtmpfs: initialized
[ 0.145183] EVM: security.selinux
[ 0.145184] EVM: security.SMACK64
[ 0.145185] EVM: security.capability
[ 0.145242] PM: Registering ACPI NVS region at bffde000 (139264 bytes)
[ 0.145242] print_constraints: dummy:
[ 0.145242] RTC time: 15:45:20, date: 02/25/13
[ 0.145242] NET: Registered protocol family 16
[ 0.145242] Trying to unpack rootfs image as initramfs...
[ 0.145242] node 0 link 0: io port [1000, ffffff]
[ 0.145242] node 0 link 0: io port [2000, 2fff]
[ 0.145242] TOM: 00000000c0000000 aka 3072M
[ 0.145242] node 0 link 0: mmio [e0000000, efffffff]
[ 0.145242] node 0 link 0: mmio [a0000, bffff]
[ 0.145242] node 0 link 0: mmio [c0000000, fe0bffff]
[ 0.145242] TOM2: 0000000140000000 aka 5120M
[ 0.145242] bus: [00, ff] on node 0 link 0
[ 0.145242] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.145242] bus: 00 index 1 [mem 0xc0000000-0xffffffff]
[ 0.145242] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[ 0.145242] bus: 00 index 3 [mem 0x140000000-0xfcffffffff]
[ 0.145242] ACPI: bus type pci registered
[ 0.145242] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.145242] PCI: not using MMCONFIG
[ 0.145242] PCI: Using configuration type 1 for base access
[ 0.145989] bio: create slab at 0
[ 0.146070] ACPI: Added _OSI(Module Device)
[ 0.146072] ACPI: Added _OSI(Processor Device)
[ 0.146074] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.148017] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.148907] ACPI: EC: Look up EC in DSDT
[ 0.149873] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.151923] ACPI: Interpreter enabled
[ 0.151927] ACPI: (supports S0 S1 S4 S5)
[ 0.151942] ACPI: Using IOAPIC for interrupt routing
[ 0.151961] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.152865] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.178002] ACPI: No dock devices found.
[ 0.178006] HEST: Table not found.
[ 0.178010] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.178070] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.178197] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.178200] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.178202] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.178204] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.178206] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xfebfffff] (ignored)
[ 0.178231] pci 0000:00:00.0: [10de:0369] type 0 class 0x000500
[ 0.178426] pci 0000:00:01.0: [10de:0360] type 0 class 0x000601
[ 0.178435] pci 0000:00:01.0: reg 10: [io 0x2f00-0x2f7f]
[ 0.178479] pci 0000:00:01.1: [10de:0368] type 0 class 0x000c05
[ 0.178493] pci 0000:00:01.1: reg 10: [io 0x2900-0x293f]
[ 0.178516] pci 0000:00:01.1: reg 20: [io 0x2d00-0x2d3f]
[ 0.178523] pci 0000:00:01.1: reg 24: [io 0x2e00-0x2e3f]
[ 0.178559] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.178565] pci 0000:00:01.1: PME# disabled
[ 0.178588] pci 0000:00:02.0: [10de:036c] type 0 class 0x000c03
[ 0.178599] pci 0000:00:02.0: reg 10: [mem 0xfeafb000-0xfeafbfff]
[ 0.178643] pci 0000:00:02.0: supports D1 D2
[ 0.178644] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.178648] pci 0000:00:02.0: PME# disabled
[ 0.178661] pci 0000:00:02.1: [10de:036d] type 0 class 0x000c03
[ 0.178672] pci 0000:00:02.1: reg 10: [mem 0xfeafac00-0xfeafacff]
[ 0.178719] pci 0000:00:02.1: supports D1 D2
[ 0.178720] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.178723] pci 0000:00:02.1: PME# disabled
[ 0.178746] pci 0000:00:05.0: [10de:037f] type 0 class 0x000101
[ 0.178758] pci 0000:00:05.0: reg 10: [io 0xd480-0xd487]
[ 0.178764] pci 0000:00:05.0: reg 14: [io 0xd400-0xd403]
[ 0.178770] pci 0000:00:05.0: reg 18: [io 0xd080-0xd087]
[ 0.178775] pci 0000:00:05.0: reg 1c: [io 0xd000-0xd003]
[ 0.178781] pci 0000:00:05.0: reg 20: [io 0xcc00-0xcc0f]
[ 0.178787] pci 0000:00:05.0: reg 24: [mem 0xfeaf9000-0xfeaf9fff]
[ 0.178830] pci 0000:00:05.1: [10de:037f] type 0 class 0x000101
[ 0.178842] pci 0000:00:05.1: reg 10: [io 0xc880-0xc887]
[ 0.178848] pci 0000:00:05.1: reg 14: [io 0xc800-0xc803]
[ 0.178853] pci 0000:00:05.1: reg 18: [io 0xc480-0xc487]
[ 0.178859] pci 0000:00:05.1: reg 1c: [io 0xc400-0xc403]
[ 0.178865] pci 0000:00:05.1: reg 20: [io 0xc080-0xc08f]
[ 0.178871] pci 0000:00:05.1: reg 24: [mem 0xfeaf8000-0xfeaf8fff]
[ 0.178914] pci 0000:00:05.2: [10de:037f] type 0 class 0x000101
[ 0.178926] pci 0000:00:05.2: reg 10: [io 0xc000-0xc007]
[ 0.178931] pci 0000:00:05.2: reg 14: [io 0xbc00-0xbc03]
[ 0.178937] pci 0000:00:05.2: reg 18: [io 0xb880-0xb887]
[ 0.178943] pci 0000:00:05.2: reg 1c: [io 0xb800-0xb803]
[ 0.178949] pci 0000:00:05.2: reg 20: [io 0xb480-0xb48f]
[ 0.178955] pci 0000:00:05.2: reg 24: [mem 0xfeaf7000-0xfeaf7fff]
[ 0.179000] pci 0000:00:06.0: [10de:0370] type 1 class 0x000604
[ 0.179045] pci 0000:00:06.1: [10de:0371] type 0 class 0x000403
[ 0.179058] pci 0000:00:06.1: reg 10: [mem 0xfeaf0000-0xfeaf3fff]
[ 0.179112] pci 0000:00:06.1: PME# supported from D3hot D3cold
[ 0.179115] pci 0000:00:06.1: PME# disabled
[ 0.179141] pci 0000:00:08.0: [10de:0373] type 0 class 0x000680
[ 0.179156] pci 0000:00:08.0: reg 10: [mem 0xfeaf6000-0xfeaf6fff]
[ 0.179162] pci 0000:00:08.0: reg 14: [io 0xb400-0xb407]
[ 0.179168] pci 0000:00:08.0: reg 18: [mem 0xfeafa800-0xfeafa8ff]
[ 0.179174] pci 0000:00:08.0: reg 1c: [mem 0xfeafa400-0xfeafa40f]
[ 0.179219] pci 0000:00:08.0: supports D1 D2
[ 0.179221] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.179225] pci 0000:00:08.0: PME# disabled
[ 0.179248] pci 0000:00:09.0: [10de:0373] type 0 class 0x000680
[ 0.179262] pci 0000:00:09.0: reg 10: [mem 0xfeaf5000-0xfeaf5fff]
[ 0.179268] pci 0000:00:09.0: reg 14: [io 0xb080-0xb087]
[ 0.179274] pci 0000:00:09.0: reg 18: [mem 0xfeafa000-0xfeafa0ff]
[ 0.179280] pci 0000:00:09.0: reg 1c: [mem 0xfeaf4c00-0xfeaf4c0f]
[ 0.179325] pci 0000:00:09.0: supports D1 D2
[ 0.179327] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.179331] pci 0000:00:09.0: PME# disabled
[ 0.179350] pci 0000:00:0a.0: [10de:0376] type 1 class 0x000604
[ 0.179392] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.179395] pci 0000:00:0a.0: PME# disabled
[ 0.179414] pci 0000:00:0b.0: [10de:0374] type 1 class 0x000604
[ 0.179454] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.179457] pci 0000:00:0b.0: PME# disabled
[ 0.179475] pci 0000:00:0c.0: [10de:0374] type 1 class 0x000604
[ 0.179516] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.179518] pci 0000:00:0c.0: PME# disabled
[ 0.179537] pci 0000:00:0d.0: [10de:0378] type 1 class 0x000604
[ 0.179577] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.179580] pci 0000:00:0d.0: PME# disabled
[ 0.179599] pci 0000:00:0e.0: [10de:0375] type 1 class 0x000604
[ 0.179639] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.179642] pci 0000:00:0e.0: PME# disabled
[ 0.179661] pci 0000:00:0f.0: [10de:0377] type 1 class 0x000604
[ 0.179701] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.179704] pci 0000:00:0f.0: PME# disabled
[ 0.179724] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.179745] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.179759] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.179773] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.179794] PCI: peer root bus 00 res updated from pci conf
[ 0.179844] pci 0000:00:06.0: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.179850] pci 0000:00:06.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.179853] pci 0000:00:06.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.179855] pci 0000:00:06.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.179857] pci 0000:00:06.0: bridge window [mem 0x140000000-0xfcffffffff] (subtractive decode)
[ 0.179888] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.179923] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
[ 0.179958] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
[ 0.179993] pci 0000:00:0d.0: PCI bridge to [bus 05-05]
[ 0.180040] pci 0000:00:0e.0: PCI bridge to [bus 06-06]
[ 0.180086] pci 0000:07:00.0: [1002:68ba] type 0 class 0x000300
[ 0.180100] pci 0000:07:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.180111] pci 0000:07:00.0: reg 18: [mem 0xfebe0000-0xfebfffff 64bit]
[ 0.180119] pci 0000:07:00.0: reg 20: [io 0xe000-0xe0ff]
[ 0.180132] pci 0000:07:00.0: reg 30: [mem 0xfebc0000-0xfebdffff pref]
[ 0.180165] pci 0000:07:00.0: supports D1 D2
[ 0.180188] pci 0000:07:00.1: [1002:aa58] type 0 class 0x000403
[ 0.180202] pci 0000:07:00.1: reg 10: [mem 0xfebbc000-0xfebbffff 64bit]
[ 0.180263] pci 0000:07:00.1: supports D1 D2
[ 0.188027] pci 0000:00:0f.0: PCI bridge to [bus 07-07]
[ 0.188031] pci 0000:00:0f.0: bridge window [io 0xe000-0xefff]
[ 0.188034] pci 0000:00:0f.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.188038] pci 0000:00:0f.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.188056] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.188222] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.188291] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[ 0.188316] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[ 0.188341] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[ 0.188366] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[ 0.188391] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
[ 0.188416] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15._PRT]
[ 0.188440] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.188443] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.188445] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.194343] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.194413] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.194482] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.194551] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.194621] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[ 0.194690] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[ 0.194758] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *14
[ 0.194828] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[ 0.194899] ACPI: PCI Interrupt Link [LUB0] (IRQs 21 22 23) *14
[ 0.194969] ACPI: PCI Interrupt Link [LMAD] (IRQs 20) *5
[ 0.195037] ACPI: PCI Interrupt Link [LUB2] (IRQs 21 22 23) *10
[ 0.195112] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *11
[ 0.195183] ACPI: PCI Interrupt Link [LAZA] (IRQs 21 22 23) *10
[ 0.195265] ACPI: PCI Interrupt Link [LSMB] (IRQs 21 22 23) *11
[ 0.195335] ACPI: PCI Interrupt Link [LPMU] (IRQs 21 22 23) *5
[ 0.195406] ACPI: PCI Interrupt Link [LSA0] (IRQs 21 22 23) *11
[ 0.195483] ACPI: PCI Interrupt Link [LSA1] (IRQs 21 22 23) *5
[ 0.195572] ACPI: PCI Interrupt Link [LATA] (IRQs 21 22 23) *0, disabled.
[ 0.195643] ACPI: PCI Interrupt Link [LSA2] (IRQs 21 22 23) *14
[ 0.195774] vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.195777] vgaarb: loaded
[ 0.195778] vgaarb: bridge control possible 0000:07:00.0
[ 0.195883] i2c-core: driver [aat2870] using legacy suspend method
[ 0.195884] i2c-core: driver [aat2870] using legacy resume method
[ 0.195952] SCSI subsystem initialized
[ 0.196032] libata version 3.00 loaded.
[ 0.196087] usbcore: registered new interface driver usbfs
[ 0.196099] usbcore: registered new interface driver hub
[ 0.196127] usbcore: registered new device driver usb
[ 0.196225] PCI: Using ACPI for IRQ routing
[ 0.202619] PCI: pci_cache_line_size set to 64 bytes
[ 0.202690] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.202693] reserve RAM buffer: 00000000bffd0000 - 00000000bfffffff
[ 0.202799] NetLabel: Initializing
[ 0.202800] NetLabel: domain hash size = 128
[ 0.202801] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.202816] NetLabel: unlabeled traffic allowed by default
[ 0.202869] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.202876] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.202879] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.212076] Switching to clocksource hpet
[ 0.219488] AppArmor: AppArmor Filesystem Enabled
[ 0.219522] pnp: PnP ACPI init
[ 0.219540] ACPI: bus type pnp registered
[ 0.219643] pnp 00:00: [bus 00-ff]
[ 0.219645] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.219647] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.219649] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.219651] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.219653] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.219656] pnp 00:00: [mem 0xc0000000-0xfebfffff window]
[ 0.219727] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.219752] pnp 00:01: [dma 4]
[ 0.219754] pnp 00:01: [io 0x0000-0x000f]
[ 0.219756] pnp 00:01: [io 0x0081-0x0083]
[ 0.219758] pnp 00:01: [io 0x0087]
[ 0.219759] pnp 00:01: [io 0x0089-0x008b]
[ 0.219761] pnp 00:01: [io 0x008f]
[ 0.219763] pnp 00:01: [io 0x00c0-0x00df]
[ 0.219787] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.219798] pnp 00:02: [io 0x0070-0x0071]
[ 0.219812] pnp 00:02: [irq 8]
[ 0.219834] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.219842] pnp 00:03: [io 0x0061]
[ 0.219866] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.219875] pnp 00:04: [io 0x00f0-0x00ff]
[ 0.219883] pnp 00:04: [irq 13]
[ 0.219907] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.220484] pnp 00:05: [io 0x03bc-0x03bf]
[ 0.220493] pnp 00:05: [irq 7]
[ 0.220495] pnp 00:05: [dma 0 disabled]
[ 0.220600] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.221087] pnp 00:06: [mem 0x000d0000-0x000d3fff window]
[ 0.221089] pnp 00:06: [mem 0x000d4000-0x000d7fff window]
[ 0.221091] pnp 00:06: [mem 0x000de000-0x000dffff window]
[ 0.221093] pnp 00:06: [io 0x0010-0x001f]
[ 0.221095] pnp 00:06: [io 0x0022-0x003f]
[ 0.221097] pnp 00:06: [io 0x0044-0x005f]
[ 0.221099] pnp 00:06: [io 0x0062-0x0063]
[ 0.221103] pnp 00:06: [io 0x0065-0x006f]
[ 0.221105] pnp 00:06: [io 0x0072-0x007f]
[ 0.221107] pnp 00:06: [io 0x0080]
[ 0.221108] pnp 00:06: [io 0x0084-0x0086]
[ 0.221110] pnp 00:06: [io 0x0088]
[ 0.221112] pnp 00:06: [io 0x008c-0x008e]
[ 0.221113] pnp 00:06: [io 0x0090-0x009f]
[ 0.221115] pnp 00:06: [io 0x00a2-0x00bf]
[ 0.221117] pnp 00:06: [io 0x00e0-0x00ef]
[ 0.221119] pnp 00:06: [io 0x04d0-0x04d1]
[ 0.221120] pnp 00:06: [io 0x0800-0x080f]
[ 0.221122] pnp 00:06: [io 0x2000-0x207f]
[ 0.221124] pnp 00:06: [io 0x2080-0x20ff]
[ 0.221126] pnp 00:06: [io 0x2400-0x247f]
[ 0.221128] pnp 00:06: [io 0x2480-0x24ff]
[ 0.221129] pnp 00:06: [io 0x2800-0x287f]
[ 0.221131] pnp 00:06: [io 0x2880-0x28ff]
[ 0.221133] pnp 00:06: [io 0x2c00-0x2c7f]
[ 0.221135] pnp 00:06: [io 0x2c80-0x2cff]
[ 0.221137] pnp 00:06: [mem 0xfea80000-0xfeabffff]
[ 0.221138] pnp 00:06: [mem 0xfee01000-0xfeefffff]
[ 0.221227] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.221230] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.221232] system 00:06: [io 0x2000-0x207f] has been reserved
[ 0.221235] system 00:06: [io 0x2080-0x20ff] has been reserved
[ 0.221237] system 00:06: [io 0x2400-0x247f] has been reserved
[ 0.221240] system 00:06: [io 0x2480-0x24ff] has been reserved
[ 0.221242] system 00:06: [io 0x2800-0x287f] has been reserved
[ 0.221245] system 00:06: [io 0x2880-0x28ff] has been reserved
[ 0.221247] system 00:06: [io 0x2c00-0x2c7f] has been reserved
[ 0.221250] system 00:06: [io 0x2c80-0x2cff] has been reserved
[ 0.221253] system 00:06: [mem 0x000d0000-0x000d3fff window] has been reserved
[ 0.221256] system 00:06: [mem 0x000d4000-0x000d7fff window] has been reserved
[ 0.221258] system 00:06: [mem 0x000de000-0x000dffff window] has been reserved
[ 0.221261] system 00:06: [mem 0xfea80000-0xfeabffff] has been reserved
[ 0.221264] system 00:06: [mem 0xfee01000-0xfeefffff] has been reserved
[ 0.221267] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.221326] pnp 00:07: [mem 0xfed00000-0xfed00fff]
[ 0.221353] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.221397] pnp 00:08: [mem 0xfec00000-0xfec00fff]
[ 0.221399] pnp 00:08: [mem 0xfee00000-0xfee00fff]
[ 0.221450] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.221453] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.221456] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.221481] pnp 00:09: [io 0x0060]
[ 0.221483] pnp 00:09: [io 0x0064]
[ 0.221492] pnp 00:09: [irq 1]
[ 0.221523] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.221554] pnp 00:0a: [irq 12]
[ 0.221585] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.221665] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
[ 0.221667] pnp 00:0b: [io 0x0a00-0x0a0f]
[ 0.221668] pnp 00:0b: [io 0x0a10-0x0a1f]
[ 0.221710] system 00:0b: [io 0x0a00-0x0a0f] has been reserved
[ 0.221712] system 00:0b: [io 0x0a10-0x0a1f] has been reserved
[ 0.221715] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.221757] pnp 00:0c: [mem 0xe0000000-0xefffffff]
[ 0.221800] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.221803] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.221895] pnp 00:0d: [mem 0xd0000000-0xdfffffff]
[ 0.221950] system 00:0d: [mem 0xd0000000-0xdfffffff] has been reserved
[ 0.221952] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.222058] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[ 0.222060] pnp 00:0e: [mem 0x000c0000-0x000cffff]
[ 0.222062] pnp 00:0e: [mem 0x000e0000-0x000fffff]
[ 0.222064] pnp 00:0e: [mem 0x00100000-0xbfffffff]
[ 0.222065] pnp 00:0e: [mem 0xfec00000-0xffffffff]
[ 0.222121] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.222123] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.222126] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.222129] system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.222132] system 00:0e: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.222134] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.222409] pnp: PnP ACPI: found 15 devices
[ 0.222410] ACPI: ACPI bus type pnp unregistered
[ 0.228634] PCI: max bus depth: 1 pci_try_num: 2
[ 0.228668] pci 0000:00:06.0: PCI bridge to [bus 01-01]
[ 0.228674] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.228680] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
[ 0.228686] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
[ 0.228692] pci 0000:00:0d.0: PCI bridge to [bus 05-05]
[ 0.228698] pci 0000:00:0e.0: PCI bridge to [bus 06-06]
[ 0.228705] pci 0000:00:0f.0: PCI bridge to [bus 07-07]
[ 0.228707] pci 0000:00:0f.0: bridge window [io 0xe000-0xefff]
[ 0.228711] pci 0000:00:0f.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.228714] pci 0000:00:0f.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.228725] pci 0000:00:06.0: setting latency timer to 64
[ 0.228730] pci 0000:00:0a.0: setting latency timer to 64
[ 0.228735] pci 0000:00:0b.0: setting latency timer to 64
[ 0.228740] pci 0000:00:0c.0: setting latency timer to 64
[ 0.228745] pci 0000:00:0d.0: setting latency timer to 64
[ 0.228749] pci 0000:00:0e.0: setting latency timer to 64
[ 0.228754] pci 0000:00:0f.0: setting latency timer to 64
[ 0.228758] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.228760] pci_bus 0000:00: resource 5 [mem 0xc0000000-0xffffffff]
[ 0.228762] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.228764] pci_bus 0000:00: resource 7 [mem 0x140000000-0xfcffffffff]
[ 0.228767] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
[ 0.228769] pci_bus 0000:01: resource 5 [mem 0xc0000000-0xffffffff]
[ 0.228771] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.228773] pci_bus 0000:01: resource 7 [mem 0x140000000-0xfcffffffff]
[ 0.228776] pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
[ 0.228778] pci_bus 0000:07: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.228780] pci_bus 0000:07: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.228822] NET: Registered protocol family 2
[ 0.228966] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.230496] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.233978] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.234453] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.234455] TCP reno registered
[ 0.234469] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.234505] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.234621] NET: Registered protocol family 1
[ 0.234832] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 0.234851] pci 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
[ 0.316030] pci 0000:00:02.0: PCI INT A disabled
[ 0.316140] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 0.316151] pci 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
[ 0.316170] pci 0000:00:02.1: PCI INT B disabled
[ 0.316223] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.316275] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.316327] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.316379] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.316434] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.316499] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.316572] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.316650] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.316733] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.316824] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.316920] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.317023] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.317133] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.317147] pci 0000:07:00.0: Boot video device
[ 0.317151] PCI: CLS 64 bytes, default 64
[ 0.318382] PCI-DMA: Disabling AGP.
[ 0.318459] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 0.318461] PCI-DMA: using GART IOMMU.
[ 0.318464] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.322025] audit: initializing netlink socket (disabled)
[ 0.322040] type=2000 audit(1361807119.316:1): initialized
[ 0.344439] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.346699] VFS: Disk quotas dquot_6.5.2
[ 0.346756] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.347255] fuse init (API version 7.17)
[ 0.347342] msgmni has been set to 7876
[ 0.347628] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.347653] io scheduler noop registered
[ 0.347655] io scheduler deadline registered
[ 0.347688] io scheduler cfq registered (default)
[ 0.347901] pcieport 0000:00:0a.0: setting latency timer to 64
[ 0.347942] pcieport 0000:00:0a.0: irq 40 for MSI/MSI-X
[ 0.348054] pcieport 0000:00:0b.0: setting latency timer to 64
[ 0.348081] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[ 0.348141] pcieport 0000:00:0c.0: setting latency timer to 64
[ 0.348167] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[ 0.348407] pcieport 0000:00:0d.0: setting latency timer to 64
[ 0.348434] pcieport 0000:00:0d.0: irq 43 for MSI/MSI-X
[ 0.348491] pcieport 0000:00:0e.0: setting latency timer to 64
[ 0.348518] pcieport 0000:00:0e.0: irq 44 for MSI/MSI-X
[ 0.348570] pcieport 0000:00:0f.0: setting latency timer to 64
[ 0.348597] pcieport 0000:00:0f.0: irq 45 for MSI/MSI-X
[ 0.348674] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.348699] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.348835] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.348840] ACPI: Power Button [PWRB]
[ 0.348886] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.348889] ACPI: Power Button [PWRF]
[ 0.350895] ERST: Table is not found!
[ 0.350897] GHES: HEST is not enabled!
[ 0.399597] Freeing initrd memory: 13872k freed
[ 0.484340] Linux agpgart interface v0.103
[ 0.485872] brd: module loaded
[ 0.486715] loop: module loaded
[ 0.487129] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[ 0.487153] pata_acpi 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
[ 0.487184] pata_acpi 0000:00:05.0: setting latency timer to 64
[ 0.487197] pata_acpi 0000:00:05.0: PCI INT A disabled
[ 0.487344] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
[ 0.487347] pata_acpi 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 23 (level, low) -> IRQ 23
[ 0.487361] pata_acpi 0000:00:05.1: setting latency timer to 64
[ 0.487368] pata_acpi 0000:00:05.1: PCI INT B disabled
[ 0.487511] ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 22
[ 0.487514] pata_acpi 0000:00:05.2: PCI INT C -> Link[LSA2] -> GSI 22 (level, low) -> IRQ 22
[ 0.487528] pata_acpi 0000:00:05.2: setting latency timer to 64
[ 0.487534] pata_acpi 0000:00:05.2: PCI INT C disabled
[ 0.487946] Fixed MDIO Bus: probed
[ 0.487966] tun: Universal TUN/TAP device driver, 1.6
[ 0.487967] tun: (C) 1999-2004 Max Krasnyansky
[ 0.488039] PPP generic driver version 2.4.2
[ 0.488153] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.488178] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
[ 0.488203] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.488206] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 0.488279] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.488304] ehci_hcd 0000:00:02.1: debug port 1
[ 0.488310] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 0.488335] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfeafac00
[ 0.500020] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.500159] hub 1-0:1.0: USB hub found
[ 0.500163] hub 1-0:1.0: 10 ports detected
[ 0.500259] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.500284] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
[ 0.500295] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.500297] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.500349] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 0.500378] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfeafb000
[ 0.558120] hub 2-0:1.0: USB hub found
[ 0.558126] hub 2-0:1.0: 10 ports detected
[ 0.558213] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.558265] usbcore: registered new interface driver libusual
[ 0.558309] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.561007] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.561014] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.561172] mousedev: PS/2 mouse device common for all mice
[ 0.561340] rtc_cmos 00:02: RTC can wake from S4
[ 0.561470] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.561510] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 0.561594] device-mapper: uevent: version 1.0.3
[ 0.561673] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.561681] cpuidle: using governor ladder
[ 0.561682] cpuidle: using governor menu
[ 0.561684] EFI Variables Facility v0.08 2004-May-17
[ 0.561903] TCP cubic registered
[ 0.562019] NET: Registered protocol family 10
[ 0.562510] NET: Registered protocol family 17
[ 0.562514] Registering the dns_resolver key type
[ 0.562652] PM: Hibernation image not present or could not be loaded.
[ 0.562664] registered taskstats version 1
[ 0.570201] Magic number: 1:680:791
[ 0.570302] rtc_cmos 00:02: setting system clock to 2013-02-25 15:45:20 UTC (1361807120)
[ 0.570309] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (2 cpu cores) (version 2.20.00)
[ 0.570316] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[ 0.570317] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 0.570329] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.570330] EDD information not available.
[ 0.571877] Freeing unused kernel memory: 920k freed
[ 0.572288] Write protecting the kernel read-only data: 12288k
[ 0.577010] Freeing unused kernel memory: 1604k freed
[ 0.581197] Freeing unused kernel memory: 1196k freed
[ 0.583916] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.601342] udevd[84]: starting version 175
[ 0.654261] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 0.654431] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[ 0.654449] forcedeth 0000:00:08.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20
[ 0.654454] forcedeth 0000:00:08.0: setting latency timer to 64
[ 0.812023] usb 1-4: new high-speed USB device number 2 using ehci_hcd
[ 1.084024] usb 1-10: new high-speed USB device number 3 using ehci_hcd
[ 1.173355] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x1c1 @ 0, addr 00:19:db:f2:2a:62
[ 1.173359] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 1.173564] ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 20
[ 1.173569] forcedeth 0000:00:09.0: PCI INT A -> Link[LMAD] -> GSI 20 (level, low) -> IRQ 20
[ 1.173574] forcedeth 0000:00:09.0: setting latency timer to 64
[ 1.224339] Initializing USB Mass Storage driver...
[ 1.224607] scsi0 : usb-storage 1-10:1.0
[ 1.224710] usbcore: registered new interface driver usb-storage
[ 1.224712] USB Mass Storage support registered.
[ 1.697654] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x1c1 @ 1, addr 00:19:db:f3:3d:82
[ 1.697658] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 1.697702] sata_nv 0000:00:05.0: version 3.5
[ 1.697720] sata_nv 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
[ 1.697723] sata_nv 0000:00:05.0: Using SWNCQ mode
[ 1.697965] sata_nv 0000:00:05.0: setting latency timer to 64
[ 1.698449] scsi1 : sata_nv
[ 1.698653] scsi2 : sata_nv
[ 1.698766] ata1: SATA max UDMA/133 cmd 0xd480 ctl 0xd400 bmdma 0xcc00 irq 21
[ 1.698769] ata2: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xcc08 irq 21
[ 1.698802] sata_nv 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 23 (level, low) -> IRQ 23
[ 1.698804] sata_nv 0000:00:05.1: Using SWNCQ mode
[ 1.699037] sata_nv 0000:00:05.1: setting latency timer to 64
[ 1.699309] scsi3 : sata_nv
[ 1.699387] scsi4 : sata_nv
[ 1.699483] ata3: SATA max UDMA/133 cmd 0xc880 ctl 0xc800 bmdma 0xc080 irq 23
[ 1.699485] ata4: SATA max UDMA/133 cmd 0xc480 ctl 0xc400 bmdma 0xc088 irq 23
[ 1.699509] sata_nv 0000:00:05.2: PCI INT C -> Link[LSA2] -> GSI 22 (level, low) -> IRQ 22
[ 1.699512] sata_nv 0000:00:05.2: Using SWNCQ mode
[ 1.699735] sata_nv 0000:00:05.2: setting latency timer to 64
[ 1.700038] scsi5 : sata_nv
[ 1.700118] scsi6 : sata_nv
[ 1.700211] ata5: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb480 irq 22
[ 1.700214] ata6: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb488 irq 22
[ 2.008028] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.012032] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.168036] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.221353] ata3.00: ATA-7: ST3160215AS, 4.AAB, max UDMA/133
[ 2.221356] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.225630] scsi 0:0:0:0: Direct-Access USB 2.0 FLASH DISK PMAP PQ: 0 ANSI: 0 CCS
[ 2.226124] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.227619] sd 0:0:0:0: [sda] 249344 512-byte logical blocks: (127 MB/121 MiB)
[ 2.228488] sd 0:0:0:0: [sda] Write Protect is off
[ 2.228491] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 2.229489] sd 0:0:0:0: [sda] No Caching mode page present
[ 2.229491] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 2.234489] sd 0:0:0:0: [sda] No Caching mode page present
[ 2.234491] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 2.235994] sda:
[ 2.240489] sd 0:0:0:0: [sda] No Caching mode page present
[ 2.240491] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 2.240493] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 2.287987] ata3.00: configured for UDMA/133
[ 2.476035] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.500558] ata2.00: ATA-8: OCZ-AGILITY3, 2.15, max UDMA/133
[ 2.500561] ata2.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.532536] ata2.00: configured for UDMA/133
[ 2.532666] scsi 2:0:0:0: Direct-Access ATA OCZ-AGILITY3 2.15 PQ: 0 ANSI: 5
[ 2.532819] sd 2:0:0:0: [sdb] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 2.532836] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.532876] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.532881] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.532901] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.532929] scsi 3:0:0:0: Direct-Access ATA ST3160215AS 4.AA PQ: 0 ANSI: 5
[ 2.533062] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 2.533143] sd 3:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.533189] sd 3:0:0:0: [sdc] Write Protect is off
[ 2.533192] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.533210] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.533698] sdb: sdb1 sdb2 < sdb5 >
[ 2.534007] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.552603] sdc: sdc1
[ 2.552850] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 2.844027] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.156022] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.223912] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.579273] Adding 4192252k swap on /dev/sdb5. Priority:-1 extents:1 across:4192252k SS
[ 3.608084] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.608090] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 3.623901] udevd[345]: starting version 175
[ 3.686855] lp: driver loaded but no devices found
[ 3.789929] i2c i2c-0: nForce2 SMBus adapter at 0x2d00
[ 3.789951] i2c i2c-1: nForce2 SMBus adapter at 0x2e00
[ 3.814442] NV_TCO: NV TCO WatchDog Timer Driver v0.01
[ 3.815662] NV_TCO: Watchdog reboot not detected.
[ 3.816986] NV_TCO: initialized (0x2440). heartbeat=30 sec (nowayout=0)
[ 3.925350] parport_pc 00:05: reported by Plug and Play ACPI
[ 3.925393] parport0: PC-style at 0x3bc, irq 7 [PCSPP]
[ 3.988226] type=1400 audit(1361807123.916:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=566 comm="apparmor_parser"
[ 3.988634] type=1400 audit(1361807123.916:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=566 comm="apparmor_parser"
[ 3.988866] type=1400 audit(1361807123.916:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=566 comm="apparmor_parser"
[ 3.990267] type=1400 audit(1361807123.916:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=567 comm="apparmor_parser"
[ 3.990680] type=1400 audit(1361807123.916:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=567 comm="apparmor_parser"
[ 3.990914] type=1400 audit(1361807123.916:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=567 comm="apparmor_parser"
[ 4.015807] MCE: In-kernel MCE decoding enabled.
[ 4.021521] EDAC MC: Ver: 2.1.0
[ 4.025518] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 4.025993] Linux video capture interface: v2.00
[ 4.036057] parport0: Printer, Hewlett-Packard HP LaserJet 5L
[ 4.036223] lp0: using parport0 (interrupt-driven).
[ 4.041717] AMD64 EDAC driver v3.4.0
[ 4.041789] EDAC amd64: DRAM ECC disabled.
[ 4.041801] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 4.041803] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 4.041804] (Note that use of the override may cause unknown side effects.)
[ 4.048157] uvcvideo: Found UVC 1.00 device Vimicro USB2.0 Camera (0ac8:3420)
[ 4.063703] input: Vimicro USB2.0 Camera as /devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4:1.0/input/input3
[ 4.063939] usbcore: registered new interface driver uvcvideo
[ 4.063941] USB Video Class driver (1.1.1)
[ 4.132217] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 4.132221] Disabling lock debugging due to kernel taint
[ 4.254070] [fglrx] Maximum main memory to use for locked dma buffers: 3793 MBytes.
[ 4.254175] [fglrx] vendor: 1002 device: 68ba count: 1
[ 4.254622] [fglrx] ioport: bar 4, base 0xe000, size: 0x100
[ 4.254784] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[ 4.254803] pci 0000:07:00.0: PCI INT A -> Link[LNEB] -> GSI 19 (level, low) -> IRQ 19
[ 4.254808] pci 0000:07:00.0: setting latency timer to 64
[ 4.255176] [fglrx] Kernel PAT support is enabled
[ 4.255200] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors
[ 4.270400] ppdev: user-space parallel port driver
[ 4.361098] usbcore: registered new interface driver snd-usb-audio
[ 4.363077] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 4.363084] snd_hda_intel 0000:00:06.1: PCI INT B -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 4.363087] hda_intel: Disabling MSI
[ 4.363114] snd_hda_intel 0000:00:06.1: setting latency timer to 64
[ 4.913221] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[ 5.212739] ACPI: PCI Interrupt Link [LNEC] enabled at IRQ 18
[ 5.212760] snd_hda_intel 0000:07:00.1: PCI INT B -> Link[LNEC] -> GSI 18 (level, low) -> IRQ 18
[ 5.212829] snd_hda_intel 0000:07:00.1: irq 46 for MSI/MSI-X
[ 5.212853] snd_hda_intel 0000:07:00.1: setting latency timer to 64
[ 5.234855] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 5.234941] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0f.0/0000:07:00.1/sound/card2/input5
[ 10.356663] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[ 10.418942] init: failsafe main process (822) killed by TERM signal
[ 10.474218] type=1400 audit(1361807130.400:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=876 comm="apparmor_parser"
[ 10.479961] type=1400 audit(1361807130.404:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=876 comm="apparmor_parser"
[ 10.490508] Bluetooth: Core ver 2.16
[ 10.490560] NET: Registered protocol family 31
[ 10.490562] Bluetooth: HCI device and connection manager initialized
[ 10.490565] Bluetooth: HCI socket layer initialized
[ 10.490567] Bluetooth: L2CAP socket layer initialized
[ 10.490573] Bluetooth: SCO socket layer initialized
[ 10.528506] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.528509] Bluetooth: BNEP filters: protocol multicast
[ 10.531617] Bluetooth: RFCOMM TTY layer initialized
[ 10.531624] Bluetooth: RFCOMM socket layer initialized
[ 10.531625] Bluetooth: RFCOMM ver 1.11
[ 10.535014] type=1400 audit(1361807130.460:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=926 comm="apparmor_parser"
[ 10.537840] type=1400 audit(1361807130.464:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=927 comm="apparmor_parser"
[ 10.538454] type=1400 audit(1361807130.464:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=927 comm="apparmor_parser"
[ 10.538693] type=1400 audit(1361807130.464:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=927 comm="apparmor_parser"
[ 10.543978] type=1400 audit(1361807130.468:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=930 comm="apparmor_parser"
[ 10.544698] type=1400 audit(1361807130.472:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=930 comm="apparmor_parser"
[ 10.548644] type=1400 audit(1361807130.476:16): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=931 comm="apparmor_parser"
[ 10.549147] type=1400 audit(1361807130.476:17): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=931 comm="apparmor_parser"
[ 10.580334] forcedeth 0000:00:08.0: irq 47 for MSI/MSI-X
[ 10.580544] forcedeth 0000:00:08.0: eth0: no link during initialization
[ 10.581547] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.582328] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.586928] forcedeth 0000:00:09.0: irq 48 for MSI/MSI-X
[ 14.559550] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 14.559553] vesafb: scrolling: redraw
[ 14.559556] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 14.561895] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90011380000, using 5120k, total 5120k
[ 14.562135] Console: switching to colour frame buffer device 160x64
[ 14.562161] fb0: VESA VGA frame buffer device
[ 14.577500] init: plymouth-splash main process (1334) terminated with status 1
[ 14.736345] fglrx_pci 0000:07:00.0: irq 49 for MSI/MSI-X
[ 14.737130] [fglrx] Firegl kernel thread PID: 1348
[ 14.737256] [fglrx] Firegl kernel thread PID: 1349
[ 14.737341] [fglrx] Firegl kernel thread PID: 1350
[ 14.737497] [fglrx] IRQ 49 Enabled
[ 14.878119] [fglrx] Gart USWC size:1236 M.
[ 14.878123] [fglrx] Gart cacheable size:490 M.
[ 14.878127] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 14.878129] [fglrx] Reserved FB block: Unshared offset:f921000, size:3df000
[ 14.878132] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[ 21.264018] eth1: no IPv6 routers present